GX75 Belt Grinder Range
Twin Speed Motor, 415 volt 3 phase,
75 x 2000mm Belts
Multifunctional
operation with special attachments – fitted within minutes
Ideal
for railing, frame and pipe construction work including shop
fitting
Features:
Safety
switch with motor protection and low voltage release
3 kW motor on GX 75
Contact and surface grinding
Very quiet
Adjustable working height
Contact wheel polyurethane lined
Surface grinding platen (height adjustable) with 75 x 430
mm graphite pad
|
GXC Pipe Grinder/ Polishers Unit
Grinds 5-100mm tubes, wet or dry grinding,
Unit for grinding and polishing of surfaces
of straight round pipes and shafts with dia. 5 – 100
mm in all lengths of metal, steel and stainless steel.
Wet
or dry grinding (for wet grinding cooling unit GXW must be
installed)
All types of abrasive belts 75 x 2000 mm can be used, including
non-woven nylon abrasive belts.
Fast and efficient grinding – pipes of l metre length
can be ground in approx. 30 seconds
Complete set of guide rails (brass, nylon or wood) is included
with the equipment
Delivery complete with power cable and plug UNIT SHOW FITTED
TO GX75SH GRINDER UNIT
|
GXR Pipe Notch Grinder
Unit
Grinds all angles between 30 & 90 degrees, Various size
rollers
avilable.
Notch Grinding Unit for pipes and profiles dia. 16 –
75 mm. Revolutionary speed of 1.500 rpm is ideal for VA-less
heat, paint and burr pipes, i.e. on finished article increases
service life of belt considerably!
Quick clamping for round and square tubes and flat material
With integrated adjustable depth stop
Cross slide is standard equipment
GX comes complete with one abrasive belt 75 x 2250 mm grit
36 (Product code S0752250036Z) and with one contact roller
dia. 42,4 mm (1 ¼”)
Contact rollers available in all sizes
Special stainless steel jaws also available and also jaws
for special profiles. UNIT SHOW FITTED TO GX75SH GRINDER UNIT
|
GXE
Deburring Machine
Ideal
for deburring of pipes and profiles of steel and other materials.
Features:
Component
support and motor station adjustable
Motor 2,2 kW, 1500 rpm
Weight 32 kg
Brush 250 x 60 mm of quality wire 0,35 mm comes installed
as part of the standard equipment, Special brushes of steel,stainless
steel and polishing wheels can be fitted
Machine
Show on Stand which is available as an optional extra.
GXW Cooling Unit (not
shown) also available for use with GXC Centerless GrindingUnit
|
