 | Ex-hire Dewalt DW712 Sliding Mitre Saw and Stand
This was part of our hire fleet of equipment but is no longer required
The saw blade is in really good condition and will not need replacing the saw and stand have recently been serviced so it is ready to be put straight into use.
The stand has some small amounts of surface rust where paint has been chipped, but this does not affect the performance at all.
Below is the full specification of the saw and stand.
DW712 Mitre Saw Features
New mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 60° right and 0 and 50° left
The innovative grooving stop allows adjustment of the cuttiing depth for grooving and rebating applications
The large dual sliding fence mechanism gives maximum support in large material cuts at any angle or combination of angles
Horizontal rails create additional capacity for larger materials
The aluminium base construction provides stability to the saw while still retaining its portability
60° right mitre angle provides enough capacity for the most difficult applications
Mitre and bevel angle detents allow for quick and easy set up of the saw
Spindle lock for easy blade replacement
DW712 Mitre Saw Specifications
Specifications
Specifications Value
Power Input 1600 Watts
Power Output 930 Watts
Blade Speed 3700-4600 rpm
Blade Diameter 216 mm
Blade Bore 30 mm
Bevel Capacity 48/-2 °
Mitre Capacity [right/left] 60/50 °
Cutting Capacity at 90°/90° (W x H) 300x70 mm
Cutting Capacity at 90°/90° (W x H) 293x85 mm
Cutting Capacity at 45°/90° (W x H) 212x70 mm
Cutting Capacity at 45°/90° (W x H) 208x85 mm
Cutting Capacity at 90°/45° (W x H) 300x50 mm
Cutting Capacity at 90°/45° (W x H) 208x56 mm
Max. Cutting Capacity at 45°/45° 208x50 mm
Max. Depth of Cut [Saws] 85 mm
Weight 19.5 kg
Depth 457 mm
Length 580 mm
Height 480 mm
DW712 Mitre Saw Standard
24 tooth saw blade
On-board blade spanner
DE7023 Mitre Saw Bench Features
Accommodates all DEWALT mitre saws
Lightweight aluminium construction provides portability in and around the jobsite
1.7 metre beam extends to support up to 3.9 metres for use with large workpieces
The beam can support up to 182 kg providing maximum flexibility and capacity
Work stops can be converted into end stops for repetitive cutting to length
Integral folding legs avoids unnecessary assembly
Integrated carry handle provides ase of transportation
2 x Work stops/support
Mitre saw brackets
Price: £347.00(Excluding: VAT at 15%) |
|
|
 | EBAC CD100 Industrial Dehumidifier
This dehumidifier is ex-hire and as a result has been well maintained and looked after.
There are a few scratches and dents on the top cover but this does not affect the performance of the machine.
Enormous costs are incurred every year through damage to inventory and through inflated building maintenance costs as a result of dampness. By installing the Ebac CD100 Dehumidifier, controlled humidity conditions can be maintained to give protection in larger commercial areas and buildings. Nominal effective volume 300m3.
Some of the features include
Variable Humidistat.
Effective, Reverse Cycle Defrost
Tubular Skid Frame (CD100 Only), Free Standing.
Electronic Defrost Control.
Adjustable Control Humidistat.
Power On Indicator
On / Off Control
Max Extraction 30 Lts Per Day.
Weight 50kg.
Height 400, Width 900, Depth 500 (mm).
Nominal Effective Volume 300m3.
Gravity Drainage
We would prefer this item to be collected however if required we will be more than happy to quote for shipping
Price: £346.96(Excluding: VAT at 15%) |
|
|
 | New Ex-Display 140amp Dual Voltage TIG Welder
The welder is brand new still in its original box and is ideal for Site & Maintenance use due to its Lightweight & Portable size.
The specification includes
Dual Voltage 110 or 240 volt
DC HF, Adjustble Post Gas & Down Slop
Up slope & Pre Gas Fixed. Adjustable Pulse
Duty Cycle @ 40% 120amps (110 volt)
Suitable for use with Generators
product code (016026)
This auction is for the machine only a torch, regulator and earth Leads are Available for an Extra £100.00 please contact us for details.
If you require any information on any of our items please do not hesitate to contact us on 01952 290800
Price: £313.04(Excluding: VAT at 15%) |
|
|
 | Thermal Arc, 250 GTSW AC/DC Square Wave Inverter Arc Welder 3phase 410v
This welder is in good condition and has been well looked after.
The specification of the welder includes
Fully adjustable hot start, pre & post gas.
Wave balance and ac Control and level also adjustable between 10-250amps.
Duty Cycle is 250amps @ 40%,
upplied complete with 12ft WP26 style torch.
Price: £500.00(Excluding: VAT at 15%) |
|
|
 | 25 mixed size American style welders hats
The hats are new old stock and are no longer sold by us as a result they are been sold in lots of 25 hats. These hats are normally sold for £4.95 each
The hats are welders hats made from genuine kromer in an American style cap.
We have 8 bags available, please note that each bag has 25 hats in different sizes and designs each bag may vary in hat sizes and destines from bag to bag.
If you require any information on any of our items please do not hesitate to contact us on 01952 290800
Price: £43.48(Excluding: VAT at 15%) |
|
|
 | Ex-demonstration/display Kawasaki Portable Generator
This Generator is ideal when consistent, continuous power is needed. Kawasaki Portable generators stand out from the crowd. Engine reliability, durability coupled with light weight and low noise make this generator ideal for the small power user. The Kawsaki GA100A generator has Avr fitted as standard ensuring that this machine will react almost instantaneously to load changes, stabilising output voltage to within 5% to protect even the most sensitive electronic equipment.
The specification includes:
Model Kawasaki GA1400A
Kva 1.2
Rated Watts 1050
Voltage 230 /115 & 12V DC
No Of Sockets 1x230 1x115 & 1x12v(DC)
Fuel Type Petrol Unleaded
Fuel Tank Capacity 4.5 Ltrs
Running Time 4 Hours
Start Method Recoil
Noise Output 62dB(a) at 7m
Weight 27 Kg
Dimensions (mm) LxWxH 454 x 296 x 400
Other Features also include:
1200 watts max output
Circuit Breaker
Low Oil Alert
Fuel Gauge
The generator comes with the handbook.
Price: £330.47(Excluding: VAT at 15%) |
|
|
 | Big Jo pedestrian fork lift truck
This truck is battery operated and is in good working order and very handy to have for a small business as it is small easy to store.
It has been sat in our yard for a few months so it will need the chains greasing and a good charge and a coat of paint.
The truck comes with its charger which uses 110 Volt input to charge the batteries.
The forks are adjustable between 420mm and 700mm with and will lift over 2 meters the total with is 1500mm.
Any viewing, questions or offers are welcome please contact our sales office on 01952 290800
Price: £306.38(Excluding: VAT at 15%) |
|
|
 | 110 volt Dewalt radio/charger
We have a limited number of these strong and weather resistant radios left in stock.
Many people like to have some form of music when working but radios are not always that portable and ones that are portable are not durable or weather resistant, the Dewalt DC011 tackles this problem head on with features that include:-
- Runs off mains and 7.2 Volt to 18 Volt NiCd/NIMH batteries
- Charges DEWALT 7.2 Volt to 18 Volt NiCd/NIMH batteries
- Digital tuner with LCD display, built-in clock, and 8 station memory presets
- Dual pivoting 28 mm flexible antenna provides more durability and better reception
- Heavy Duty AM/FM radio with auxiliary port allows user to listen to the radio or CD (when plugged into auxiliary port)
- Heavy Duty storage case allows storage for CD player and CDs
- High efficiency weather resistant speakers with dual bass ports for maximum bass and range
- The DEWALT 3-stage charging system provides maximum run-time and extends overall life of the battery
- Weather sealed charger door opens easily for fast battery changes
- Sturdy carry frame for extra durability
The DC011 Specifications include
Voltage 7.2 -18 V
Battery Not included
Radio Power Source AC - DC
Radio Frequencies AM- FM Stereo
Charging Time 30-70 min
Length 548 mm
Height 366 mm
Weight 6.0 kg
Price: £95.65(Excluding: VAT at 15%) |
|
|
 | ATCO Commodore B17 Cylinder Mower
This mower is a petrol powered 16" cut cylinder mower with a Metal Rear roller
The mower is in excellent mechanical condition and has recently been serviced.
Although the mower has been used and as a result has some cosmetic scuffs and scratches but this does not alter the performance at all.
for further details please contact our sales office on 01952 290800
Price: £72.34(Excluding: VAT at 15%) |
|
|
 | Brand New Partner Ride on Lawn Tractor
This lawn tractor has been in our show room and never used this is evident to see, the tyres still have the moulding dimples on and the exhaust is shiny inside. It has never been started or driven.
210 litre central rear discharge grass collection system,
92cm cutting width
Powerful Briggs and Stratton 13.5hp engine.
It also has a cast iron front axle for longer life.
6+1 gear system
cutting heights from 35-100mm
a P13592RB 2005 model built in the USA
body panels made from steel
comes with a 12 month manufacture warranty
the lights at the front work
Price: £1,102.13(Excluding: VAT at 15%) |
|
|
 | Countax C300H Ride on Lawn Mower/Garden Tractor
The triple bladed IBS (Interactive Blade System) with contra rotating 92cm/36" cut deck, Rear powered sweeper system with nylon brushes are in perfect working condition, the whole machine has been regularly serviced and looked after.
The C300H has a hydrostatic transmission that is controlled by forward and reverse foot pedals so there's no gear changing involved.
The engine is a powerful 9.69kW (13hp) Briggs and Stratton engine.
This mower is Ideal for a large garden or small holding and the powered collection ensures even wet grass can be collected.
Price: £850.21(Excluding: VAT at 15%) |
|
|
 | John Deere 2653A Tees and Surround Lawn Mower
This mower has had very little use with only 1200 hours on the clock, the mower has been fully serviced and where necessary re-conditioned only a couple of months ago.
The Mower features a full-time 3WD hydrostatic traction system that directs hydrostatic oil flow to wheels with traction in tough terrain.
This mower is Ideal for use on sports pitches a golf course or a very large garden
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800.
Price: £3,957.00(Excluding: VAT at 15%) |
|
|
 | New 100 litre petrol powered sprayer
This sprayer would be ideal for someone with a large garden or green house that requires being able to spray large areas with ease.
The specification of the sprayer includes.
Part number CA 2161
2 wheeled steel troll (handles can be removed)
100 liter tank
2.5 HP 4 stroke Honda engine
18 bar pressure
10 meters of hose
Price: £424.68(Excluding: VAT at 15%) |
|
|
 | New 60 litre petrol powered sprayer
This sprayer would be ideal for someone with a large garden or green house that requires being able to spray large areas with ease.
The specification of the sprayer includes.
Part number CA 2165
2 wheeled steel troll (handles can be removed)
60 liter tank
2.5 HP 4 stroke Honda engine
18 bar pressure
10 meters of hose
Price: £340.00(Excluding: VAT at 15%) |
|
|
 | BRAND NEW END OF LINE MACHINE SIP TOPMIG TURBO 195
195 amp power welder
Heavy duty transformer - 120amps @ 40% duty cycle
Welds from auto body thin 0.7mm to a thick 8mm (mild Steel) easily and cleanly
Variable wire spool size capability - accepts both 5kg and 15kg spools for maximum convenience and economy
Runs on a single phase (230v 50Hz 25 amp)
For more information please contact our sales office on 01952 290800.
Price: £395.00(Excluding: VAT at 15%) |
|
|
 | OTC Accutig 300P Ac/DC TIG Welder
This is a High quality and very heavy duty Transformer Based TIG welding Machine
It comes complete with welding torch a Variable Control, foot Pedal and analogue control system
Some specification includes,
415 volt
Output Range 4 to 300Amps
Rated frequency 50/50Hz
Arc spot time 0.2 to 5 seconds
Rated duty cycle 40%
Pulse wide range 15 to 85% (variable on P.C.B.)
For more information please contact our sales office on 01952 290800.
Price: £1,250.00(Excluding: VAT at 15%) |
|
|
 | Marina push Lawn Mower
This is mower is ex-display and has only ever been in our showroom as a result this is a new never used machine.
The specifications include
A push along Lawn Mower that has the option of mulching the grass or discharging it from the side.
A 49cm Cut that Powered by a Briggs & Stratton 4hp Quattro Engine
Cut height adjustment 25-70mm
For more information please contact our sales office on 01952 290800.
Price: £136.17(Excluding: VAT at 15%) |
|
|
 | Thermal Dynamics 250 AC/DC water cooled TIG welder
3phase 400V Input,
250A Tig Inverter with HF Tig,
Lift Tig, Stick,
Digital Meters,
2T/4T Function,
Up Slope/Down Slope with Repeat Function and Full Function Built In Pluse,
AC Frequency Control and AC Wave Balance Control.
Net Weight 21 Kg
Dimensions (H x W x D)
372 x 209 x 457 mm
Output Range 3 - 250 Amps
Duty Cycle @ Rated Output
100% @ 180A
60% @ 210A
40% @ 250A
Smart Logic
Thermal Overload Protection with indicator Simple to user Control Panel Interface Automatic Arc Control Remote Receptacle Lift-Start TIG HF Arc Starting TIG Pulser & Sloper
For more information please contact our sales office on 01952 290800.
Price: £1,850.00(Excluding: VAT at 15%) |
|
|
 | Citoarc 2800 250amps 415V TIG Welder
Ex Demonstration TIG Welder
AC/DC TIG rectifiers ideal for both industrial users and maintenance shops for the fabrication and repair of steels, stainless steels, copper and aluminium. The machine provides the operator with all the necessary controls to produce consistent welds of optimum quality.
Specification
Input 400V
Frequency 50/60hz
Power Consumption 22KVA Max
Line Fuse rating 32A
Weld 90V Max
Welding Range 7-280A
Welding Current:
@ 35% duty cycle 280A
@ 60% duty cycle 215A
@ 100% duty cycle 165A
Dimensions 900x590x730
Insulation Class F/H
For more information please contact our sales office on 01952 290800.
Price: £1,650.00(Excluding: VAT at 15%) |
|
|
 | SIP Trade Medusa T2401
13hrs continuous running time
4 stroke air cooled, OHV, petrol engine
2 x 230v AC socket, & 12DC output socket
Continuous output 2000VA.
Low oil alert system
MODEL
MEDUSA T2401
OUTPUT VOLTAGE 12V(DC)
MAX. OUTPUT 2400(VA)
OUTPUT VOLTAGE 230
CONTINUOS OUTPUT POWER 2000(VA)
ENGINE SIZE 5HP
FUEL UNLEADED
FUEL TANK CAPACITY 15 LITRES
SOUND LEVEL 90 dB(A)
SOUND PRESSURE 70 dB(A)
PACKED DIM. (D X W x H) MM 460 X 605 X 520
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800.
Price: £225.00(Excluding: VAT at 15%) |
|
|
 | Dewalt DW321K Jigsaw 110volt
This jigsaw is a heavy duty and durable piece of equipment it is part of our ex-hire fleet and is no longer required, the unit is in good serviced condition
The details of the jigsaw
High output motor 701 Watt Motor combined with powerful full wave electronics to ensure a constant torque and cutting speed
Keyless Blade Change
4 Stage pendulum Action
110volt
The jigsaw is in its own case.
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800.
Price: £85.11(Excluding: VAT at 15%) |
|
|
 | Milwaukee PD2-18 Percussion drill 110volt
This drill is a heavy duty and durable piece of equipment it is part of our ex-hire fleet and is no longer required, the unit is in good serviced condition.
The details of the drill are
700 watt
18mm concrete capacity
13mm steel capacity
2 speed gear box
keyed 13mm chuck
110 volt
Price: £170.21(Excluding: VAT at 15%) |
|
|
 | Makita JR3000 Reciprocating "Shark" Saw 110volt
Ideal for general cutting and Demolition work. This unit is in good serviced condition, it is an ex hire machine that is no longer required on our fleet.
110 volt
540w motor
90mm Max Cut dept
30mm Stroke
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800.
Price: £84.26(Excluding: VAT at 15%) |
|
|
 | Draper Expert 18V Power Tool Kit
This kit comes with a Combi Hammer Drill, Nailer, Variable Speed Jigsaw, 140mm Circular Saw and Torch with xenon bulb.
This is an ex showroom display set and as a result they are in as new condition
This is a high quality and nice looking set and would make any DIY enthusiast happy and their friends envious.
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800.
Price: £149.00(Excluding: VAT at 15%) |
|
|
 | Ex-display Allet Predator 30 Commercial Walk behind Rotary Lawn Mower
This is an ex-display mower that has had little use, only been used for demonstration purposes.
The mower is ideal for a large lawn, paddocks, meadows or road side use as it is powered by a Briggs & Stratton 13hp Diamond Engine through a Hydrostatic Drive.
The cutting deck is a 38" Cut, which is done though Twin Blades, (new tips recently fitted) the machine is key start and is Front wheel height adjustable to suite different requirements.
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800
Price: £953.00(Excluding: VAT at 15%) |
|
|
 | Brand new draper 14.4volt Cordless 1/4" Hex Impact Driver
This is a high quality Draper Expert Powertool which has never been used,
This Impact Driver has a list price of over £150.00
The specification and Features include
1/4" 'quick release' hex drive
Variable speed control
Compact hi-torque motor
Changeable carbon brushes
Electric brake
Forward and reverse
Soft grip handle
127Nm of torque
3000 impacts per minute
If you have any questions or to arrange to have a view Please contact the sales office on 01952 290800.
Price: £63.83(Excluding: VAT at 15%) |
|
